Ce RoHS FC Proved and Active Carbon Home Air Purifier

I.Use Instructions

1: A control and manual

Plug in the power, press the power button to start, start the purifier body, adjustable speed,

press the key air quality, air quality, this time from the light sensor preheat for about 60

seconds while air quality quickly identify the current space. Depending on air quality air

LED light color represents the current air quality.

2: Automatic mode

After starting product, built-in air quality sensor automatically detects the indoor air quality,

after activating the automatic mode, the product will be based on measured air quality, to

select the most suitable wind speed.

Attention: air aura will automatically turn on automatic mode, you can manually shut down

the aura.

3: Manual wind speed settings

When the indoor temperature is too high, the air mass sensor may form condensation, this

time even if the air quality is very good, the air quality indicator lights may also indicate

poor quality.In this case, the automatic mode will cause the product fan speed operation.

To solve this problem, simply clean the air mass sensor, often for environmental reasons if

the formation of condensation, it is recommended that you use one of the manual wind

speed settings.

4: manual adjustment Winds

Press the key to continuous wind speed, you need to select the wind speed, the high-

strength low wind speed indicator will light up accordingly.

Note: poor indoor air quality, the need for additional super airflow selective enhancement of

wind velocity.

II. Special function

1: Winds

The machine adopts the fourth gear to control speed, automatic mode to control one / two /

third gear, turn off the automatic mode, manual control can Winds fourth gear. One green

lantern gear, second gear blue lights, three / four red lantern stall.

2: Child Lock

In order to prevent children not touch other keys, causing the product does not work,

especially set the child lock button! Child lock button long press 3 seconds to lock the

function keys effective, To turn, according to the child lock three seconds to re-opened.

All function keys restore.

3:Filter cleaning

Replace the set time 3980 hours, usually six months to replace the reminder, cleaner

display lights buzzer alarm, automatic sound Ding Dingding per ring for three minutes,

indicating the filter to be replaced.

4: Lifting methods:

After the machine is plugged in, not turned down to standby after a long press the function

button for 5 seconds UV hear warning tone described releasing successful.

5:Remote control

This paragraph air purifier, you can control all functions within eight meters, increasing the

user-friendly design, improve work efficiency.

6:Air sensor function:

In Intelligent mode, the sensor to feel around smoke, dust, cleaner automatically open, then

the wind speed based on air quality, wind speed automatic gear selection, after purification

is complete, the cleaner will automatically be in standby mode and switch to smart .

III. Product Features

This product also increases the PM2.5 display, automatic detection value of PM2.5 air

power, also showed values in the work environment, it will change from time to time

according to the value of PM2.5 purification conditions, to achieve the best results, when

less than 15 indoor PM2.5, PM value display LO, if the display - Description PM2.5 value of

more than 500, especially in a closed environment effect is more prominent, allowing users

a more intuitive and user-friendly experience perfect design.

IV.Technical parameters
 

V.Product Warranty Period: 1 year

Warranty Terms:

1. Please keep this purchase document as maintenance warranty.

2. Please use the product under normal conditions. All the faults and damages caused by

human factors, usage in abnormal working conditions,  or failure to the use the product

according to the manual or in environments unspecified in the manual will not be covered

by this warranty.

3. Any product damage caused by the user's private disassemble, repair or modification;

and non-normal worn, abrasion or crack of the product will not be covered by this warranty.

This warranty card must be presented for warranty service. In cases when a customer

cannot provide this card or alter this card without authorization, we have the right to decide

not to provide warranty service.